Pintle take-up for spooling of long products on drums with uniform lay.
The device consists of a lifting fork, retractable pintles, a lifting device, a screw layout device, a frequency regulated drive, a control panel. The drum is lifted using a screw-nut system.
The device uses a screw layout device that provides a constant layout step from the first winding layer to the last. The device has no chain drives, so it ensures a minimum noise level.
A pneumatic brake enables to effectively stop the full drum with the weight of up to 1500 kg.
The PU 630-10 take-up can be operated as part of extrusion lines, rewinding lines and quality control lines for cable products.
The main characteristics of the universal device PU 630-10 for take-up drums B10, B8, K630.
Meaning name of parameters and sizes
Max. cable diameter, not to exceed, mm
Outer drum diameter, mm
1000 (800) (630)
Inner drum diameter
Max. weight of full drum, kg
Maximum cable layout width
Max take-up speed, m/min
Electric motor power, kW
Gearbox type, gear ratio
Worm type, i=15
Traversing unit type
Lifting device electric motor power, kW
Traversing unit gearbox type, gear ratio
Worm type, i=20
Lifting device gearbox type, gear ratio
Worm type, i=40
Device weight, not to exceed, kg
Noise level, not to exceed, dBA